Hello Andrea, You will need to create one registration and isolation (if you need it) VLANs per remote site.
One registration VLAN directly connected on PacketFence and 23 Remote Registration VLANs (With different network obviously). Thanks, Ludovic Zammit [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: www.inverse.ca <http://www.inverse.ca/> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) and PacketFence (http://packetfence.org <http://packetfence.org/>) > On Oct 23, 2020, at 1:39 PM, Andrea Lenarduzzi via PacketFence-users > <[email protected]> wrote: > > In This scenario can I configure 2 registration vlan and 2 isolation vlan? > One to serve master site, One Other 23 sites. > I have to announce registration adn isolation vlan on all sites routers? > > On site 34 ports switch: Can I configure 12 helper-adress ports and 12 > "normal" ports? > > Thank you > Regards > > Il venerdì 22 febbraio 2019, 21:41:19 CET, G PL via PacketFence-users > <[email protected]> ha scritto: > > > Hello, > You can see in the documentation the routed network for help you. > In my opinion, you need to create all vlan on all switch with helper-adress > on isolation and register vlan. You need also to create the registration and > isolation vlan on the packetfence's switch to listen the dhcp. > Regards > > > > > Le vendredi 22 février 2019, Andrea Lenarduzzi via PacketFence-users > <packetfence-users@lists. sourceforge.net > <mailto:[email protected]>> a écrit : > Hi, this is my actual network infrastructure: > > MPLS (1 master location, 23 other locations) > > Master is star center to go out to internet for all locations > > In Master there are routing vlan,server vlan, dmz,3/4 separated vlan,voip vlan > > Example Location 2 there is a simple switch (1 subnet 192.168.111.0/24 > <http://192.168.111.0/24>) > Example Location 3 there is a simple switch (1 subnet 192.168.112.0/24 > <http://192.168.112.0/24>) > Example Location 4 there is a simple switch (1 subnet 192.168.113.0/24 > <http://192.168.113.0/24>) > Example Location 5 there is a simple switch (1 subnet 192.168.114.0/24 > <http://192.168.114.0/24>) > ecc ecc > In no master locations voip phone are on the same pc subnet. > > I want build Packetfence to allocate ip/subnets by roles (locations > role,users role,wifi access ecc ecc) > > Packetfence now is a VM on ServerVLAN with 1 eth > > How I have set Managment,registrations,isolat ions,portal settings? > > Thanks > Andrea > _______________________________________________ > PacketFence-users mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/packetfence-users > <https://lists.sourceforge.net/lists/listinfo/packetfence-users> > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
