In This scenario can I configure 2 registration vlan and 2 isolation vlan? One
to serve master site, One Other 23 sites.I have to announce registration adn
isolation vlan on all sites routers?
On site 34 ports switch: Can I configure 12 helper-adress ports and 12 "normal"
ports?
Thank youRegards
Il venerdì 22 febbraio 2019, 21:41:19 CET, G PL via PacketFence-users
<[email protected]> ha scritto:
Hello,You can see in the documentation the routed network for help you.In my
opinion, you need to create all vlan on all switch with helper-adress on
isolation and register vlan. You need also to create the registration and
isolation vlan on the packetfence's switch to listen the dhcp.Regards
Le vendredi 22 février 2019, Andrea Lenarduzzi via PacketFence-users
<packetfence-users@lists. sourceforge.net> a écrit :
Hi, this is my actual network infrastructure:
MPLS (1 master location, 23 other locations)
Master is star center to go out to internet for all locations
In Master there are routing vlan,server vlan, dmz,3/4 separated vlan,voip vlan
Example Location 2 there is a simple switch (1 subnet 192.168.111.0/24)Example
Location 3 there is a simple switch (1 subnet 192.168.112.0/24)Example Location
4 there is a simple switch (1 subnet 192.168.113.0/24)Example Location 5 there
is a simple switch (1 subnet 192.168.114.0/24)ecc eccIn no master locations
voip phone are on the same pc subnet.
I want build Packetfence to allocate ip/subnets by roles (locations role,users
role,wifi access ecc ecc)
Packetfence now is a VM on ServerVLAN with 1 eth
How I have set Managment,registrations,isolat ions,portal settings?
ThanksAndrea
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
