Connect both of them and show me the result of this command: show authentication session int YOUR_INTERFACE detail
Thanks, Ludovic Zammit [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: www.inverse.ca <https://www.inverse.ca/> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) and PacketFence (http://packetfence.org <http://packetfence.org/>) > On Mar 22, 2021, at 12:55 PM, NITISH AGGARWAL <[email protected]> wrote: > > Voice vlan 100 and access vlan 10 > > On Mon, Mar 22, 2021, 22:23 Ludovic Zammit <[email protected] > <mailto:[email protected]>> wrote: > What’s your voice VLAN id ? > > Thanks, > > Ludovic Zammit > [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: > www.inverse.ca <https://www.inverse.ca/> > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu > <http://www.sogo.nu/>) and PacketFence (http://packetfence.org > <http://packetfence.org/>) > > > > > > > >> On Mar 22, 2021, at 12:13 PM, NITISH AGGARWAL <[email protected] >> <mailto:[email protected]>> wrote: >> >> switchport mode access >> Switchport access vlan 10 >> switchport voice vlan 100 >> switchport port-security mac-address sticky 0200.000x.xxxx >> switchport port-security maximum 2 >> authentication host-mode multi-host >> authentication order dot1x mab >> authentication priority dot1x mab >> authentication port-control auto >> authentication periodic >> mab >> no snmp trap link-status >> dot1x pae authenticator >> dot1x timeout quiet-period 2 >> dot1x timeout tx-period 3 >> >> On Mon, Mar 22, 2021, 20:12 Ludovic Zammit <[email protected] >> <mailto:[email protected]>> wrote: >> Hello, >> >> Show me the interface configuration that you have on your switch where you >> plug your phone. >> >> Thanks, >> >> Ludovic Zammit >> [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: >> www.inverse.ca <https://www.inverse.ca/> >> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu >> <http://www.sogo.nu/>) and PacketFence (http://packetfence.org >> <http://packetfence.org/>) >> >> >> >> >> >> >> >>> On Mar 18, 2021, at 8:27 AM, NITISH AGGARWAL via PacketFence-users >>> <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi, >>> >>> I have setup PacketFence as per guide. Dot1x is enabled and working but I >>> am not able to use MAB. Due to which my ip phones are not get >>> authenticated. >>> >>> In switch (cisco 2960) I was using authentication host-mode as multi-domain >>> and MAB is enable. But since it was not authenticating I am using host-mode >>> as multi-host. Now my system and phone is working but it is not >>> authenticating my ip phone which is causing problem sometimes. I am not >>> able to resolve the issue please suggest what needs to be done >>> _______________________________________________ >>> PacketFence-users mailing list >>> [email protected] >>> <mailto:[email protected]> >>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>> <https://lists.sourceforge.net/lists/listinfo/packetfence-users> >> >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
