switchport mode access Switchport access vlan 10 switchport voice vlan 100 switchport port-security mac-address sticky 0200.000x.xxxx switchport port-security maximum 2 authentication host-mode multi-host authentication order dot1x mab authentication priority dot1x mab authentication port-control auto authentication periodic mab no snmp trap link-status dot1x pae authenticator dot1x timeout quiet-period 2 dot1x timeout tx-period 3
On Mon, Mar 22, 2021, 20:12 Ludovic Zammit <[email protected]> wrote: > Hello, > > Show me the interface configuration that you have on your switch where you > plug your phone. > > Thanks, > > > Ludovic Zammit > [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > > > > On Mar 18, 2021, at 8:27 AM, NITISH AGGARWAL via PacketFence-users < > [email protected]> wrote: > > Hi, > > I have setup PacketFence as per guide. Dot1x is enabled and working but I > am not able to use MAB. Due to which my ip phones are not get > authenticated. > > In switch (cisco 2960) I was using authentication host-mode as > multi-domain and MAB is enable. But since it was not authenticating I am > using host-mode as multi-host. Now my system and phone is working but it is > not authenticating my ip phone which is causing problem sometimes. I am not > able to resolve the issue please suggest what needs to be done > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users > > >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
