Thanks for all the help, it's working now.

In case anyone else has the same problem with Packetfence ZEN running in VMWare 
ESXi

-I'm running ESXi 7 on a supermicro server
-Installed packetfence zen
-Only one virtual nic is assigned to PF
-My issue was not being able to see the IP addresses of my nodes in PF
-The problem was not PF, the problem was the port group assigned to the PF 
server in ESXi was set to VLAN 0, which turns off vlan tagging, I changed the 
setting to 4095 which turns vlan tagging on.
-In PF I created VLANs for each of my production VLANs, assigned each of them 
an IP in their respective network and set the correct subnet mask, set the Type 
to "DHCP Listener" I left the additional listening daemon field blank since the 
Type is already set to "DHCP Listener"

I can now see the IPs of my nodes in PF

________________________________
From: Enrique Gross <egr...@jcc-advance.com.ar>
Sent: Tuesday, October 12, 2021 7:36 PM
To: David Moore <dave.mo...@outlook.com>
Cc: packetfence-users@lists.sourceforge.net 
<packetfence-users@lists.sourceforge.net>; egr...@jcc.com.ar <egr...@jcc.com.ar>
Subject: Re: [PacketFence-users] Nodes not showing IP addresses

Dave

Hi, you could try to add vlan interfaces from the GUI, assign IP from the 
appropriate IP segment, and configure your switch port as a trunk with all the 
vlans you want PF to run dhcp-listener daemon.

Have a nice day,

Enrique

El mar, 12 oct 2021 a las 12:28, David Moore 
(<dave.mo...@outlook.com<mailto:dave.mo...@outlook.com>>) escribió:
Thanks Enrique, I tried what is mentioned in the third URL you provided but I 
don't have a sysconfig folder in /etc

Dave

________________________________
From: Enrique Gross 
<egr...@jcc-advance.com.ar<mailto:egr...@jcc-advance.com.ar>>
Sent: Monday, October 11, 2021 9:09 PM
To: David Moore <dave.mo...@outlook.com<mailto:dave.mo...@outlook.com>>; 
packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>
 
<packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>>
Subject: Re: [PacketFence-users] Nodes not showing IP addresses

Hi Dave

Have a look at

https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_advanced_network_topics

I think  Ludovic advice is a good option

https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_dhcp_remote_sensor

You could have a PF interface vlan set up on your prod networks, here

https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_interface_in_every_vlan

Enrique

El vie, 8 oct 2021 a las 12:30, David Moore 
(<dave.mo...@outlook.com<mailto:dave.mo...@outlook.com>>) escribió:
>
> Hi Enrique,
>         Is it possible to use packetfence as the dhcp server for all of my 
> networks, or is it limited to the networks internal to PF like registration 
> and isolation?
>
> Thanks
> Dave
>
> ________________________________
> From: Enrique Gross 
> <egr...@jcc-advance.com.ar<mailto:egr...@jcc-advance.com.ar>>
> Sent: Wednesday, October 6, 2021 6:27 PM
> To: David Moore <dave.mo...@outlook.com<mailto:dave.mo...@outlook.com>>
> Cc: 
> packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>
>  
> <packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>>
> Subject: Re: [PacketFence-users] Nodes not showing IP addresses
>
>
> Hi Dave,
>
>
>
> You can try to add a DHCP relay for one of your prod networks on your 
> firewalla router pointing to the management IP address of PF, where DHCP 
> listener is running, PF won't be the DHCP server for that network but will 
> receive DHCP requests
>
>
>
> I'm testing with Mikrotik devices, on production vlans where mikrotik router 
> is DHCP server, configuring DHCP relay informs PF of new devices IP addresses
>
>
>
> Enrique.
>
>
> El mié, 6 oct 2021 a las 17:16, David Moore 
> (<dave.mo...@outlook.com<mailto:dave.mo...@outlook.com>>) escribió:
>
> Hi Enrique,
>         I'm using ubiquiti unifi switches and access points but the router is 
> a firewalla gold, which also the dhcp server. I'm not sure where to include 
> the ip helpers? Should the PF management interface have the DHCP listener 
> daemon turned on?
>
> Thanks
> Dave
>
> ________________________________
> From: Enrique Gross via PacketFence-users 
> <packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>>
> Sent: Wednesday, October 6, 2021 9:40 AM
> To: 
> packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>
>  
> <packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>>
> Cc: Enrique Gross 
> <egr...@jcc-advance.com.ar<mailto:egr...@jcc-advance.com.ar>>
> Subject: Re: [PacketFence-users] Nodes not showing IP addresses
>
> Hi Dave, hope you're doing well
>
> Are you using ip helpers on those production vlans? look at the docs
> for "27.2. Production DHCP access"
>
> Enrique
>
>
> El mié, 6 oct 2021 a las 2:33, David Moore via PacketFence-users
> (<packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>>)
>  escribió:
> >
> > I'm running the latest version of Packetfence ZEN. I have pretty much 
> > everything working the way I want but a few things. I'm going to seek 
> > assistance one issue at a time.
> > Currently I am unable to get the IP address to show up for registered 
> > online devices. I tried adding vlans in packetfence for the production 
> > vlans I wish to see IPs for, I set the interface to other and listening 
> > daemon dhcplistener is on but no IP info shows up. When I tried to assign 
> > an IP address to the vlans I want to the packetfence network intergaces 
> > disappear and I have to go to the CLI to remove the vlans I added.
> >
> > I only have one virtual NIC assigned to PF, the management interface gets a 
> > reserved dhcp IP address from my firewalla router. I have a vlan for 
> > registration and a vlan for isolation managed by PF, my production 
> > environment has 4 more vlans managed by production dhcp (firewalla).
> >
> > Authenticated users for the various production vlans all get the correct IP 
> > address
> >
> > Any help would be greatly appreciated
> >
> > Thanks
> > Dave
> > _______________________________________________
> > PacketFence-users mailing list
> > PacketFence-users@lists.sourceforge.net<mailto:PacketFence-users@lists.sourceforge.net>
> > https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
> --
>
>
> _______________________________________________
> PacketFence-users mailing list
> PacketFence-users@lists.sourceforge.net<mailto:PacketFence-users@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
> --
>
>


--


--

[Imágenes integradas 1]
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to