Hello John, i would say as always with iphone ... The thing is if you try to change the vlan id after the registration on the portal then the iphone will disconnect and ... never try to reconnect. Compare to android and windows devices who will reconnect.
The only solution is to use web-auth in this case. (the vlan never change but the acl yes) https://www.packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.html#_webauth Regards Fabrice Le lun. 25 oct. 2021 à 10:49, John Sayce via PacketFence-users < packetfence-users@lists.sourceforge.net> a écrit : > Hi, > > > > I’ve got an issue with iPhone and out of band enforcement so I’m not sure > the issue is with packetfence or my Aruba access points. I’m fine with > android phones and windows laptops. > > > > When an iPhone registers (or changes role) the COA request is sent to > wireless controller and appears to complete without error however the > iPhone doesn’t appear disconnect from the network. As such it doesn’t > renew the dhcp lease for the new network and consequently doesn’t have > access. > > > > I’ve tried setting the DHCP lease time to 45 seconds but this doesn’t > appear to work either. The iPhone stubbornly seems to cling to the dhcp > lease. > > > > I found this post (issue 2) for other captive portal products which > appears to describe the same issue. > https://community.extremenetworks.com/communities/community-home/digestviewer/viewthread?MessageKey=d48bae8e-4d0e-4f4f-b1ba-fb7641c52cb7&CommunityKey=3c7204eb-25f1-447b-9e7a-8c9a19ec264d&tab=digestviewer#bmd48bae8e-4d0e-4f4f-b1ba-fb7641c52cb7 > > > > Has anyone experiences this? > > > > Thanks > > John Sayce > _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
