Hello there, You could create different connection profile with a filter based on the network.
On the one that you want no registration, enable auto registration. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us: <https://community.akamai.com/> <http://blogs.akamai.com/> <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> <http://www.linkedin.com/company/akamai-technologies> <http://www.youtube.com/user/akamaitechnologies?feature=results_main> > On Jul 25, 2022, at 4:15 AM, leonida...@gmail.com wrote: > > hi, I have Packetfence which is configured as follows: > It has 5 network cards: eth0 of type "other" which acts as wan, and eth1, > eth2, eth3, eth4 which are 4 LAN interfaces. > eth4 is of type "management". > The interfaces related to eth1, eth2 and eth3 are configured as Inline. > On the eth2 network card I have 2 vlan which are configured as Inline. > My requirement is that for the subnets related to the 2 vlan there are > authentication policies through captive portal even if the source still needs > to be established (2 wifi networks will be needed). > Instead, the subnets relating to eth2 and eth3 must exit without any type of > authentication, that is, pf must act as a dhcp server and gateway, but it > must only be a broadband router. > Instead in the subnet relative to eth1, there must be only one host > configured with a static ip that must go out on the Internet. > How can I configure everything? Thank you
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users