Thanks for the reply. The problem is that in the connection profile relating to the eth2 and eth3 interfaces, it is necessary to put as source: null and this causes the client to receive the request for acceptance of the terms and conditions of use of the network and then wait for the client to be registered.
Da: Zammit, Ludovic <luza...@akamai.com> Inviato: lunedì 25 luglio 2022 15:11 A: leonida...@gmail.com Cc: packetfence-users@lists.sourceforge.net Oggetto: Re: Configuration info Hello there, You could create different connection profile with a filter based on the network. On the one that you want no registration, enable auto registration. Thanks, Ludovic Zammit Product Support Engineer Principal <https://www.akamai.com/us/en/multimedia/images/custom/2019/logo-no-tag-93x4 5.png> Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us: <https://community.akamai.com/> <http://blogs.akamai.com/> <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> <http://www.linkedin.com/company/akamai-technologies> <http://www.youtube.com/user/akamaitechnologies?feature=results_main> On Jul 25, 2022, at 4:15 AM, leonida...@gmail.com <mailto:leonida...@gmail.com> wrote: hi, I have Packetfence which is configured as follows: It has 5 network cards: eth0 of type "other" which acts as wan, and eth1, eth2, eth3, eth4 which are 4 LAN interfaces. eth4 is of type "management". The interfaces related to eth1, eth2 and eth3 are configured as Inline. On the eth2 network card I have 2 vlan which are configured as Inline. My requirement is that for the subnets related to the 2 vlan there are authentication policies through captive portal even if the source still needs to be established (2 wifi networks will be needed). Instead, the subnets relating to eth2 and eth3 must exit without any type of authentication, that is, pf must act as a dhcp server and gateway, but it must only be a broadband router. Instead in the subnet relative to eth1, there must be only one host configured with a static ip that must go out on the Internet. How can I configure everything? Thank you
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
