Hi Mark,
>From the configuration information, I think I know what might be going on.
You are using the original version of R5, which unfortunately, does not
support debugging to the Palm IIIx. In order to debug to the Palm OS 3.1 and
above, you will need to use the patch debugger. You might want to download
and install the CW for Palm R5 Patch 1 and CW for Palm R5 Patch 1 Compiler
Update from the Metrowerks website http://www.metrowerks.com. In addition,
there were problems debugging to POSE 2.1d28. You should either use POSE
2.1d26 with the patch, or download and install POSE 2.1d29 (just posted
yesterday on Palm's POSE seeding site) and install the debugger plugin on
the seeding site as well.
hope this helps.
Rgds,
JK Lam
Metrowerks Technical Support
----- Original Message -----
From: Mark A. Peters <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, July 12, 1999 8:41 PM
Subject: Re: Corrupt POSE session files?
> I'm using R5, but I don't think I've installed any patches (I could be
wrong
> though). Here are the version numbers of the relevant pieces:
>
> CodeWarrior IDE 3.1 build 0135
> POSE 2.1d28
> ROM image: PalmIIIxDebug.rom, dated Dec. 3, 1998
>
> Note that today I switched to using the Palm V ROM image, and in the
course
> of several hours of work, I experienced _no_ crashes. Could be luck,
could
> be cause and effect.
>
> Mark Peters
>
> ----------
> >From: "Jun-Kiat Lam" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Subject: Re: Corrupt POSE session files?
> >Date: Mon, Jul 12, 1999, 11:33 AM
> >
>
> > Hi Mark,
> >
> > Do you know which version of our tools you are using? If you are using
> > Release 5, are you also using the patch? Also which version of the Palm
OS
> > Emulator are you using? This would help in narrowing the problem down.
> >
> > Rgds,
> > JK Lam
> > Metrowerks Technical Support
> >
> > ----- Original Message -----
> > From: Mark A. Peters <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Sunday, July 11, 1999 11:30 PM
> > Subject: Corrupt POSE session files?
> >
> >
> >> Very frequently (ten or so times per day) CodeWarrior (Mac) crashes,
> >> followed shortly thereafter by the entire machine, due to what appears
to
> > be
> >> corruption of the POSE document representing the saved Palm
environment.
> >> Typically, it starts with a bogus "Protection violation" error upon
> > starting
> >> a new debug session from CodeWarrior. Sometimes immediately killing
the
> >> debugger and retrying works, sometimes the crashes happen instead.
> > Throwing
> >> away the POSE session file and starting over is the only reliable way
to
> >> recover.
> >>
> >> Has anybody else seen this? Is there a way to avoid it? Just FYI -
I've
> >> been using the Palm IIIx ROM image during this, and I haven't yet tried
> > some
> >> other ROM image.
> >>
> >> Thanks,
> >>
> >> Mark Peters
> >>
> >
> >
>
