If you change to the large code model, you may also
need to change to Far Data and Far String Constants.
When I changed to the large code model, my program
failed until I made the other changes.
Also, be sure your segments are all under 64K. I had
great difficulty with this. Very great difficulty -- Metrowerks
and/or Palm should re-evaluate their documentation.
I added new segments in
the main project window, but that wasn't enough. Thanks
to advice I got on this list, I was able to finish switching
to multiple segments. In the 68K Linker part of the
project settings dialog, check the box for generating
a link map. This will tell you the real size of your
segments, not the wishful-thinking size that's shown
in the main project window. If you only have one
segment, you need to uncheck the Link Single Segment
box in the 68K Linker part of the settings dialog.
Hamish's advice about changing the runtime library
is also essential.
Good Luck!
Greg Bungo
[EMAIL PROTECTED]
(630)949-3250 voice
(630)949-3299 fax
----- Original Message -----
From: Hamish McGovern <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 18, 1999 7:17 AM
Subject: RE: Size of application exceeds 90k
> You need to change the Code Model (linking)
> (Code Generation - 68K Processor)
> from smart mode to large, and replace
> the libraries in you project.
>
> Replace StartupCode.lib
> With MSL Runtime Palm OS (2i).Lib
>
> use the Add files to project, it takes a little while to
> find these libraries in the code warrior install
>
> These details can be found in the Code Warrior help pages
> (with some difficulty)
>
> Hamish
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 18 November 1999 2:52
> To: [EMAIL PROTECTED]
> Subject: Size of application exceeds 90k
>
>
>
>
> Hi ,
> I have made an application whose size is around 90k (.prc size) using
> codewarrior for palm III/V .
> When I try to install the application on the POSE it gives the following
> error.
> "Could not install the Palm OS file "Filename.prc" because Palm OS error
> 0x0201 [dmErrMemError] occurred."
>
>
> Note: When the size of appliaction was around 72K it was loading
> successfully on the POSE.
> Can anybody suggest me what is the problem.
>
>
> Thanx and regards
> Ashish
>
>
>
>
>
>
