I tried to set the Prefs button setting from HotSync button to something else. After changed this setting, device launches that particular screen without stop. For ex., i changed Hotsync button pref to Calc app., now onwards device is launching to Calc app without stop.
I did try all the resets(soft, hard & no-notify reset), but this problem continues after reset. -Prabakar. ----- Original Message ---- From: Jeff Loucks <[EMAIL PROTECTED]> To: Palm Developer Forum <[email protected]> Sent: Monday, 25 June, 2007 4:34:05 AM Subject: Re: Device syncs non-stop! Early USB interface chips could lock up due to ESD (electro-static discharge). For example, the early m5xx devices had insufficient discharge protection and would lock up. The only way to shut them down was to disconnect the battery. This was especially bad, since the PalmV battery wasn't removeable :( It's not likely in your case, but something to try. Actually, like others, my vote is some kind of hardware problem. On 6/24/07, Lionscribe <[EMAIL PROTECTED]> wrote: > My theory would be that your HotSync > cable is damaged, and it damaged the > connectors on both devices, either physically or by shorting them. > You can try setting the Prefs for the > HotSync button to something else, > and see what happens. Go to 'Prefs, Buttons, Hotsync'. > Lionscribe > > -- > For information on using the ACCESS Developer Forums, or to unsubscribe, > please see http://www.access-company.com/developers/forums/ > -- [Jeff Loucks] -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/ __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/ -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
