Hi,
No sweat, it's one of those things where it's tough to tell
precisely what is causing the instability after installing just one
more item... Sounds like a possible opportunity for a Conflict
Catcher like utility... :-)
Cheers,
Bruce.
>Hi, thanks for the response.
>
>I think the unit passed the DRAM test, but I'll run it again, since I
>can't remember whether I ran the test on this unit, or just the one
>that I sent in last month for replacement of a cracked case.
>(Thirty minutes later) OK, the unit passed!
>
>Am installing the update again to see if I can replicate the problems.
>I did have a whole sleu of hacks installed, including AfterBurner,
>which I suspect was the culprit in this case.
>
>Sure enough, I've found that the display problems come back with
>Afterburner running even at a slightly increased clock speed, and go
>away with Afterburner stopped.
>
>My apologies for suspecting the OS update!
>
>On Fri, 28 Jul 2000 09:55:41 -0700
>Bruce Thompson <[EMAIL PROTECTED]> wrote:
>
>> Hi,
>> Have you tested your unit to see if it is affected by the DRAM
>> issue? If not please do so as soon as possible. We did test 3.5.2 on
>> non-English devices, there should be nothing preventing you from
>> using it on any 3.5.X device.
>>
>> I do have a theory of what happened with your unit, but it
>> assumes that your unit is affected by the DRAM issue. Running the
>> DRAM test and installing the DRAM patch (if necessary) should
>> completely eliminate the problem.
>
>===============================
>Stuart Uleman [EMAIL PROTECTED]
>http://hanachan.org/
>===============================
>
>
>--
>For information on using the Palm Developer Forums, or to unsubscribe, please
>see http://www.palmos.com/dev/tech/support/forums/
--
------------------------------------------------------------------------------
Bruce Thompson | "Pinkie! Are you pondering what I'm pondering?"
Software Engineer | "I think so Brain, but if they called them Sad
Partner Engineering | Meals kids wouldn't buy them!"
Palm, Inc.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
