I have tried almost everything that Jeff is telling an more:-) Like, closing
Constructor used to help sometime and touching the project file used to
help sometime. But what worked best for me were the patches from Metrowerks
website. I used to have CodeWarrior for Palm Computing Release 5. I had
to get patches 5.1 and 5.2 (YOU HAVE TO GET BOTH UPDATES IF YOU DON'T
ALREADY) and a lot of my problems got solved.
Good luck!!
Subu Iyer
Compaq Computer Corp.
> Sender: [EMAIL PROTECTED]
> From: DIAMOND JEFF <[EMAIL PROTECTED]>
> Date: Thu, 17 Aug 2000 18:49:14 -0400
> To: "Palm Developer Forum" <[EMAIL PROTECTED]>
> Subject: Re: Codewarrior Debugging with POSE
>
> I am using the debugger with a IIIc and POSE, and I've found the
> connection EXTREMLEY buggy (usually I have an 80% failure rate), and
> that didn't change with the latest update.
>
> Here are things I do to attempt to connect to a debug device, in orders
> of increasing desperation:
>
> => Disable all breakpoints, or if none are enabled, enable one. (This
> works some of the time.)
> => Reset the device.
> => In POSE, load a fresh ROM
> => Completely rebuild my project
> => Close CodeWarrior and reopen it.
>
> In general, I never expect to get too many successful connections before
> i have to reload Codewarrior.
>
> It's inconvenient, and on a larger project the rebuilds would REALLY be
> a pain, but when I perservere like this I can usually get a debug
> connection often enough to do some basic test runs.
>
> Now, I'm not using a visor, but maybe some of this will help.
>
> - Jeff
>
>
> Dan Samber wrote:
> >
> > Until now, I have been happily debugging my programs on my Visor.
> > >From everything I read, it seems like I should be able to step through
> > my code and use the Codewarrior debugger on POSE instead.
> >
> > So far..... nuttin! Either I get a "failed to connect to remote" or some
> > mysterious error number from Codewarrior. I thought that all I'd have to
> > do was have POSE running and have my palm connection setting set
> > to "emulator". I even tried writing the infamous shortcut .. 2 into POSE
> > (which is what I do on my Visor to put it into console mode).
> >
> > I have read GOBS of documentation on the debugger itself... to no avail!
> >
> > Please help me save my batteries!
> >
> > Thanks,
> >
> > Dan
> >
> > --
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
