Thanks. I have a large program, and removing the object code and rebuilding takes a long time! If I hard reset POSE, that works.
This seems like a fairly serious bug. Strange there's no fix. It seems to work ok on the small app I was working on, just not the ~100k app. "Joe Malone" <[EMAIL PROTECTED]> wrote in message news:88392@palm-dev-forum... > > --- DL <[EMAIL PROTECTED]> wrote: > > I am using POSE 3.5 and CodeWarrior 8.2. If I debug, stop > > debugging, make a change to the software, rebuild, and start > > debugging again POSE doesn't always have my latest software. > > Meaning, the old debugging PRC is still loaded. The only real > > way to get a new software build into POSE is to do a Hard Reset. > > ... > > Its very difficult to debug this way since I'm never sure if the > > current image is loaded. Any ideas? > > I have found it reliably reloads if I do the following 3 steps each > time: > > 1. Remove Object Code. > 2. Reset Project Entry Paths. > 3. Debug. > > > __________________________________________________ > Do You Yahoo!? > Yahoo! - Official partner of 2002 FIFA World Cup > http://fifaworldcup.yahoo.com > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
