Hello, I have the same situation on my treo 650, but only since I updatet to firmeware 1.20 ENA. With the version 1.13 ROW it works ok.
I wil also be happy if someone has a solution to solve the problem. Regards Stefan "Jesse Hillman" <[EMAIL PROTECTED]> schrieb im Newsbeitrag news:[EMAIL PROTECTED] > I have an existing raw IR app that works fine on older Palms. The problem with the Treo and Zire 72 is that the first character I receive is garbaged up. If I send 123, then pause for a second then 567, the Treo receives, %23 #67 (where % and # are random 8 bit hex chars). The first character is always garbage. If I send continuously to the Treo all the data seems to be ok. Any delay between characters and I get a garbage character in place of the first character I should receive. > > I am using the new serial manager at 9600 baud. We have been using the application to communicate with the MicroChip 2122 for 2 -3 years now with no problems. The Palm models we normally use are the 500 series, the Symbol 1800, and the Meazura. > > Anyone have any thoughts? > > Thanks, > Jesse > -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
