Howdy Jack-- Everything Ed says is true. However, bear in mind that with this game there are no rules. There is no "right way" and no "wrong way." Whatever works for you is the right way, and you will figure this out for yourself after building for a while. Don't be afraid to try something different.
I use Elmers, or something like it, and I don't wait for it to dry out a bit. It is almost like super glue--almost instant. Put a smallish amount of glue on one side, but the pieces together, and squeeze (heavy duty tweezers are good for this) for a few seconds. The paper absorbs a lot of the water from the glue and it is set. Yes, it does get stronger with complete drying, but you don't have to hold it until then. One thing I find of great value. After printing your sheets, spray them with a light coat of acrylic lacquer. I use Krylon, but there are others. This seals the ink in, and most of the dirt out. It makes it much easier to keep the model clean as you work on it. Also, any excess glue squeezed out of a joint can be finger wiped off with no bad effects. I'm looking forward to seeing pictures of your builds! John Freeman http://2oldkiters.smugmug.com/ -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
