I'm fairly new to the paper modeling hobby. I've built some sci-fi, one 1/72 and two 1/32 aircraft and one 1/18 car. All of these I've built from card stock. Recently, I decided to step it up and try assembling on photo paper but didn't have very good results. I have an HP Deskjet 5440 photo printer and was using HP glossy photo paper. My issue was that even after about a day, even though the ink was dry to the touch, it still came off just from the slightest touch like paper moving on top of it of accidently with a fingertip. Needless to say, I've become quite dissappointed with this type of assembly as it isn't as much fun. My question is, for cars, is there a safe spray gloss finish I can apply after assembly? Thanks Brian
-- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To view this discussion on the web visit https://groups.google.com/d/msg/papermodels/-/5-YGfJsJoFEJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
