Hi Mickael, I like to try it. Where or How can I get the file of CGNS plugin ? I am using Paraview 4.3.1 for windows (may be the latest one). I am not familiar with Linux or Unix... But I try to comple the source code...
Thank you so much teaching me. Masaaki 2015-03-17 16:02 GMT+09:00 Mickael Philit <[email protected]>: > Hello, > > sorry to intrude, > I think the problem may come from the CGNS loader of ParaView. > When using the CGNS plugin from ParaView development version, you get the > same picture as Ensight. > My two cents > > Mickael > > > On 17/03/2015 05:04, Masaaki SHOJIMA wrote: > > Hi Berk, > > I appreciate your kindness > > Here, I attaches the data. > Compare Gradient.pdf (252KB) > > A calculated field by SC/Tetra solver is uploaded in Dropbox. (Calc.zip) > Please download the data. It contains FLD format for SC/Tetra post and > CGNS format for Ensight and Paraview. > https://www.dropbox.com/s/5fpeu1qwhyzjn5u/Calc.zip?dl=0 > > (1) I calculated the flow and the pressure in a simple cylinder for a test > ( diameter 0.005m, length 0.01m). Plug flow at inlet with 0.03 m/s. > > (2) Data were transfered to Ensight and Paraview in CGNS format. > > (3) Pressure was mapped on the surface and compared between SC/Tetra post, > Ensight and Paraview. All application provided same results. > > (4) Gradient (pressure) was calculated in each post and z-component of > Gradient (pressure) was visualized with same colored contour. Only paraview > provided a different image because the computed gradients in paraview had > half values compared to SC/Tetra post and Ensight. > > (5) Gradient (velocity-X) was also calculated in each post and the > X-component of Grad (velocity-X) was visualized. Same results as shown in 4. > > > Thanks a lot. > > Masaaki > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to > subscribe/unsubscribe:http://public.kitware.com/mailman/listinfo/paraview > > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
