Thanks Masaaki. I will look into it. I wish that I could say the same about northern New York State. The high temperature for today and tomorrow is 30F (-1C). Most of the snow melted though so spring is coming :-)
-berk On Tue, Mar 17, 2015 at 8:04 PM, Masaaki SHOJIMA <[email protected]> wrote: > Hi Berk, Armin, Michael and friends > > It is getting warm and flowers are starting to bloom in japan, this > morning. > > Nightly Builds of Paraview was downloaded on 2015-Mar-18 > (ParaView-Windows-64bit-NIGHTLY.zip). > > Gradient of Pressure was calculated using "Gradient of Unstrucutred > Dataset" filter and Z component of Grad (pressure) was visualized. > > Unfortunately, Nightly build did not settle the problem... > The computed values by nightly builds were also half compared to those of > Ensight. > > Could you take a look of the result in the attached PDF? > > Thanks for your continuous help. > > Masaaki > > 2015-03-17 22:01 GMT+09:00 Berk Geveci <[email protected]>: > >> Hi Masaaki, >> >> I will hold off testing on my end until you have a chance to test with >> nightly binaries. Please let us know how it goes. >> >> Regards, >> -berk >> >> On Tue, Mar 17, 2015 at 8:09 AM, <[email protected]> wrote: >> >>> You could test it with the nighly builds from the dashboard. That way >>> you don't have to compile anything. >>> >>> You can find more information here: >>> http://www.paraview.org/Wiki/ParaView_Nightly_Binaries >>> >>> -Armin >>> >>> >>> >>> On Tue Mar 17 12:27:27 2015 GMT+0200, Masaaki SHOJIMA wrote: >>> > Hi, Michael, >>> > >>> > I found a web-page regarding the CGNS reader, in which you are making >>> > important comments. >>> > http://comments.gmane.org/gmane.comp.science.paraview.user/23957 >>> > >>> > I have to wait for the next version, is it right? >>> > >>> > Thanks >>> > >>> > Masaaki >>> > >>> > 2015-03-17 16:02 GMT+09:00 Mickael Philit <[email protected]>: >>> > >>> > > Hello, >>> > > >>> > > sorry to intrude, >>> > > I think the problem may come from the CGNS loader of ParaView. >>> > > When using the CGNS plugin from ParaView development version, you >>> get the >>> > > same picture as Ensight. >>> > > My two cents >>> > > >>> > > Mickael >>> > > >>> > > >>> > > On 17/03/2015 05:04, Masaaki SHOJIMA wrote: >>> > > >>> > > Hi Berk, >>> > > >>> > > I appreciate your kindness >>> > > >>> > > Here, I attaches the data. >>> > > Compare Gradient.pdf (252KB) >>> > > >>> > > A calculated field by SC/Tetra solver is uploaded in Dropbox. >>> (Calc.zip) >>> > > Please download the data. It contains FLD format for SC/Tetra post >>> and >>> > > CGNS format for Ensight and Paraview. >>> > > https://www.dropbox.com/s/5fpeu1qwhyzjn5u/Calc.zip?dl=0 >>> > > >>> > > (1) I calculated the flow and the pressure in a simple cylinder for >>> a test >>> > > ( diameter 0.005m, length 0.01m). Plug flow at inlet with 0.03 m/s. >>> > > >>> > > (2) Data were transfered to Ensight and Paraview in CGNS format. >>> > > >>> > > (3) Pressure was mapped on the surface and compared between SC/Tetra >>> post, >>> > > Ensight and Paraview. All application provided same results. >>> > > >>> > > (4) Gradient (pressure) was calculated in each post and z-component >>> of >>> > > Gradient (pressure) was visualized with same colored contour. Only >>> paraview >>> > > provided a different image because the computed gradients in >>> paraview had >>> > > half values compared to SC/Tetra post and Ensight. >>> > > >>> > > (5) Gradient (velocity-X) was also calculated in each post and the >>> > > X-component of Grad (velocity-X) was visualized. Same results as >>> shown in 4. >>> > > >>> > > >>> > > Thanks a lot. >>> > > >>> > > Masaaki >>> > > >>> > > >>> > > >>> > > >>> > > _______________________________________________ >>> > > Powered by www.kitware.com >>> > > >>> > > Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> > > >>> > > Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> > > >>> > > Search the list archives at: http://markmail.org/search/?q=ParaView >>> > > >>> > > Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> > > >>> > > >>> > > >>> > >>> >>> -- >>> Sent from my Jolla >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Search the list archives at: http://markmail.org/search/?q=ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> >> >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
