Hello Kai, Thanks for your questions, I have put my responses inline below:
On Thu, Sep 24, 2015 at 5:45 AM, kai liu via ParaView <[email protected] > wrote: > Dear, > > > I have deployed ParaViewWeb. Everything seems to work fine, but I am not > able to visualize outputs, such as rendering the output fields such as T, > V, etc. > > I built and tried ParaViewWeb 4.1, 4.3 and 4.4 with offscreen OSMesa, and > I have received the same issues. Currently I use Apache 2.4.16 as a front > end running on port 8080, python launcher and ParaViewWeb 4.4 with > offscreen OSMesa. The following is my launcher and > Apache configuration files: > > *launcher.json* > > { > > "configuration": { > "host" : "localhost", > > "port" : 9000, > > "endpoint": "paraview", > > "content": "/home/user/ParaViewWeb/ParaView/build/www", > > "proxy_file": "/home/user/ParaViewWeb/pv-mapping-file/mapping.txt", > "sessionURL" : "ws://testexample.com:8080/proxy?sessionId=${id} > <http://testexample.com:8080/proxy?sessionId=$%7Bid%7D>", > > "timeout" : 25, > > "log_dir" : "/home/user/ParaViewWeb/pvwLogs", > "upload_dir" : "/home/user/ParaViewWeb/upload", > "fields" : ["file", "host", "port", "updir"] > > }, > > > "resources" : [ { "host" : "localhost", "port_range" : [9001, 9010] } ], > > > "properties" : { > "build_dir" : "/home/user/ParaViewWeb/ParaView/build", > "python_exec" : "/home/user/ParaViewWeb/ParaView/build/bin/pvpython", > "python_path": > "/home/user/ParaViewWeb/ParaView/build/lib/site-packages", > "WWW" : "/home/user/ParaViewWeb/ParaView/build/www", > "dataDir": "/home/user/ParaViewWeb/data", > "load_file": "/home/user/ParaViewWeb/upload", > "source_dir": "/.../src" > }, > > "apps": { > "pipeline": { > "cmd": [ > "${python_exec}", "-dr", > "${python_path}/paraview/web/pv_web_visualizer.py", > "--port", "${port}", "--data-dir", "${dataDir}" > ], > "ready_line" : "Starting factory" > }, > "visualizer": { > "cmd": [ > "${python_exec}", "-dr", > "${python_path}/paraview/web/pv_web_visualizer.py", > "--port", "${port}", "--data-dir", "${dataDir}" > ], > "ready_line" : "Starting factory" > }, > "loader": { > "cmd": [ > "${python_exec}", "-dr", > "${python_path}/paraview/web/pv_web_file_loader.py", > "--port", "${port}", "--data-dir", "${dataDir}", "-f", > "--authKey", "${secret}" > ], > "ready_line" : "Starting factory" > }, > "data_prober": { > "cmd": [ > "${python_exec}", "-dr", > "${python_path}/paraview/web/pv_web_data_prober.py", > "--port", "${port}", "--data-dir", "${dataDir}", "-f", > "--authKey", "${secret}" > ], > "ready_line" : "Starting factory" > } > } > } > > *httpd-vhosts.conf* > > <VirtualHost *:8080> > ServerName testexample.com > ServerAdmin [email protected] > DocumentRoot "/home/user/ParaViewWeb/ParaView/build/www" > ErrorLog "/home/user/ParaViewWeb/apacheLogs/pv-error_log" > CustomLog "/home/user/ParaViewWeb/apacheLogs/pv-access_log" common > > > ProxyPass /paraview http://localhost:9000/paraview > > # Turn on the rewrite engine > RewriteEngine On > > # This is the path the mapping file Jetty creates > RewriteMap session-to-port > txt:/home/user/ParaViewWeb/pv-mapping-file/mapping.txt > > # This is the rewrite condition. Look for anything with a sessionId= > in the query part of the URL and capture the value to use below. > RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] > > # This does the rewrite using the mapping file and the sessionId > RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] > > <Directory "/home/user/ParaViewWeb/ParaView/build/www"> > Options Indexes FollowSymLinks > Order allow,deny > Allow from all > AllowOverride None > Require all granted > </Directory> > </VirtualHost> > > > > > *Issue 1: Loading ASCII stl file* > > When I try to load my ASCII stl file on the ParaviewWeb, I receive the > following error message in my log file. However, desktop ParaView > application loads the file fine. > > ERROR: In > /home/user/ParaViewWeb/ParaView/src/VTK/IO/Geometry/vtkSTLReader.cxx, line > 461 > vtkSTLReader (0x5d89b50): STLReader: error while reading file > /home/user/ParaViewWeb/data/Mitchell_Lee_Administration_ReckordArmory_.stl > at line 14: unable to read reading point. > > ERROR: In > /home/user/ParaViewWeb/ParaView/src/VTK/Common/ExecutionModel/vtkExecutive.cxx, > line 784 > vtkPVCompositeDataPipeline (0x5d84f70): Algorithm > vtkFileSeriesReader(0x5d881b0) returned failure for request: vtkInformation > (0x5d97f30) > Debug: Off > Modified Time: 225417 > Reference Count: 1 > Registered Events: (none) > Request: REQUEST_DATA > FROM_OUTPUT_PORT: 0 > ALGORITHM_AFTER_FORWARD: 1 > FORWARD_DIRECTION: 0 > > Did you build the ParaView desktop application in the same build as the version you're using to run ParaViewWeb? Maybe you could try to take one of the standard ParaView datasets and try to load it in ParaViewWeb, and see if you have the same issue you mentioned above. To get this data if you don't already have it, go here: http://www.paraview.org/download/ And under "Type of Download", choose "Data, Documentation, and Tutorials". Once you get this data, try opening the "disk_out_ref.ex2" file in ParaViewWeb. If you see the same issue as above, then there could be something going on with the way you have built ParaView, which we can try to figure out at that point. If you do not see the same issue as above, then perhaps you could send me (off the list) a sample data file I could use to try to replicate the problem and debug it on this end. > > *Issue 2: * > > If I do the following selections on the ParaViewWeb, I always receive > src/VTK/Common/Core/vtkDataArrayTemplate.h:191: > T vtkDataArrayTemplate<T>::GetValue(vtkIdType) [with T = float; vtkIdType = > long long int]: Assertion `id >= 0 && id < this->Size' failed message in > the log file and cause the web socket connection closed. > > [image: Inline image] > > > > > 2015-09-23 17:33:52-0400 [-] Log opened. > 2015-09-23 17:33:53-0400 [-] Site starting on 9009 > 2015-09-23 17:33:53-0400 [-] Starting factory <twisted.web.server.Site > instance at 0x7fb6f2e55830> > 2015-09-23 17:33:53-0400 [HTTPChannel,0,127.0.0.1] Client has reconnected, > cancelling reaper > 2015-09-23 17:33:53-0400 [HTTPChannel,0,127.0.0.1] on_connect: connection > count = 1 > pvpython: > /home/user/ParaViewWeb/ParaView/src/VTK/Common/Core/vtkDataArrayTemplate.h:191: > T vtkDataArrayTemplate<T>::GetValue(vtkIdType) [with T = float; vtkIdType = > long long int]: Assertion `id >= 0 && id < this->Size' failed. > > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------- > > WebSocket connection to > 'ws://XXXXXXXXXXX:8080/proxy?sessionId=0c562ad6-623f-11e5-9b44-00155dd73e0d' > failed: Error during WebSocket handshake: Unexpected response code: 503 > > > I checked HTTP traffic, it has the following message. I assume the > connection is closed because of the above error. > > > I wonder if the server side process crashed as a result of the error you see in the log file? That would explain the websocket connection error. Again, trying a known data set like "disk_out_ref.ex2" may help us to pinpoint problem which caused the error output you saw above. > *Issue 3: Slow ParaViewWeb* > > My ParaViewWeb is very slow. Even I change the rendering mode to WebGL, It > is still very slow. The Ubuntu 14.04 Sever specifications are the > following: > > - 8 Cores > - 8 GB RAM > - 2.3 Ghz processors > > To get faster rendering with OSMesa, you may try building a recent version of OSMesa using Gallium + LLVMPipe. See here: http://www.paraview.org/Wiki/ParaView/ParaView_And_Mesa_3D But even that won't be as fast as hardware rendering (not using OSMesa). I'm not sure why you don't see a speedup when switching to WebGL, though, for if your data is small enough to all fit in within the GPU of your desktop or laptop, then it should be faster than offscreen rendering on the server, once the data is loaded. Just glancing through the configuration files you provided, I don't see anything wrong. Hope this helps, Scott > > Please let me know if I have setup anything incorrectly. Could anybody > help me with the above three issues that I am experiencing now. Thank you > very much! > > > Kai L. > > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
