on 10/15/01 12:11 AM, THE ROCK at [EMAIL PROTECTED] wrote: > I want to remove the drive but on pulling > it out the power supply is not long enough for it to come out all the > way (it's on the bottom bay). I need to move the top drive, which is my > start up drive, but it's not bulging. Is there something I'm missing?
The drive carriers on this machine can be a little difficult to budge. What I did was stick a flat blade screwdriver under the tab on the upper drive carrier and pry up gently until I could move the drive. I also have a tool that will help me remove those power plugs from drives...they also can be pretty sticky. It's a very long bladed pair of tweezers that I use to grasp the sides of the power plug, then use leverage against the drive to pop the plug out. tafkar -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
