>I've got some more RAM for my 9500/G4 Proligix (2x 64MB DIMMS). But I >actually have no idea how to install it. Is there a downloadable PDF >manual for the 9500 which might explain this in a nice idiot proof way?
Undo 6 screws holding case at back. Pull case forward ~2" and lift off. Unplug all connectors along top edge of motherboard ; care not to bend/break connectors. 2 have clips needing depressing to release. Pull processor & all PCI cards from cavity behind fan. Push top & bottom clips of power switch and pull switch forward. Remove central screw holding beige frame to motherboard. CAREFULLY release 2 clips along back edge of frame from motherboard. Pivot frame away from motherboard and disengage 2 hooked pegs from holes near front edge of board. Slide motherboard back (toward rear of machine!) about 7mm, where chassis clip meets notch in top edge of board. Pull up clip nearer front of top edge of motherboard and tilt board outward. Pull small connectors off lower rear corner and bottom edge of board and lift board out. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
