Got a problem here. I recently picked up a 7500 from the local Goodwill, with a 17" monitor. It came with 48MB of memory, and everything seemed to work quite well, running 8.6. Looking to speed it up a bit, I purchased 128MB of ram of the swap list (2 64MB DIMMS, supposedly right for the machine), and installed it. On startups, I get bus errors, type 10 errors, and unimplemented traps. Removing it, I can boot normally. I did all the normal stuff, zapping the pram, hitting the cuda switch after installation, rebuilding the desktop. Does this sound like a case of bad memory? If I boot with extensions off, I see in ASP that the memory is being recognized correctly, but it definitely is causing major problems. Any other possibilities I may have missed?
Carl Kehley -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
