I was in the middle of initializing a 9.1GB Seagate Barracuda (50 pin SCSI) with Drive Setup when we suffered a power failure as a thunderstorm cruised through the area.
Since power has returned, the only program I have that even recognizes that the drive is in the (internal, ID 4) SCSI chain is SCSI Probe. I can get SCSI Probe to light the LED on the drive but that's it. Drive Setup doesn't recognize it and, therefore, will not initialize it. Any ideas? Spells? Prayers? PM8600/300 OS 9.1 on the boot drive (ID 0) internal zip (ID 5), CD-R (ID 1), as well, as Apple 24x CR-ROM drive (ID 3). TIA, jc -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
