In my orginal post about this problem, I neglected to report my system configuration:
8600/9600 Mother Board/xlr8G3/300Mhz/1.5GB RAM/18GB HD/OS 9.1 Original post: I recently acquired a Voodoo 5 card and installed it according to the supplied instructions, but now neither card works (I also have an ATI Xclaim VR 128). With no video output, I cannot install the Voodoo drivers (the instructions say to install the card, connect the monitor, then install the software). Should these cards be installed on different PCI busses? Right now I have the cards installed on PCI bus #1: Voodoo 5 in slot A1 and the Xclaim VR128 in slot B1. Monitor is a 13" Apple Color Monitor connected via a Griffin adapter to the VGA port. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
