Sorry, Can't be much help. I have a 9600/350. It had no video board in it when I got it. I put in iXMicro's TwinTurbo 8mb card and it worked ok. Later, when changing machines around, I put in a Voodoo 5500. I connected the second monitor and it worked.
It worked better when I installed the drivers, but it worked at a basic level right away, without drivers. John B. Robert McAllister wrote: > I also have a Voodoo5 card in a 9600, and if memory serves correctly the > instructions state that all other video card drivers should first be > removed. When I first got the Voodoo I left the old card in for comparison, > an ix3d Ultimate Rez. As in your case, there was no video output from either > card. I didn't pursue it further since the ix3d was going into a 7500. > > Hopefully someone whe has two video cards with all drivers working in a 9600 > will enlighten us. > > -+-+-+- > > RPM > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
