Would this be why I had trouble with them? When I had a couple installed in my 9500, I kept having problems, I was using 50 pin adapters and connecting them internally.
Steve Brown on 7/22/02 12:26 AM, Charlie Reyes at [EMAIL PROTECTED] wrote: >> How are you attaching ide cards to a 2930? >> >> I have one in a 9500, but they are 50 pin connections, >> >> unless you are connecting them externally some how? >> >> Steve Brown >> > > There is a short IDE cable that attaches to the drive from the board > beneath. The board terminates in a 68 pin UW-SCSI female connector. SCSI ID > is configured by suitable jumpers on the card. > > Charlie. > > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
