CP Reyes wrote:
> >Charlie Reyes wrote:
> >
> >> >How are you attaching ide cards to a 2930?
> >> >
> >> >I have one in a 9500, but they are 50 pin connections,
> >> >
> >> >unless you are connecting them externally some how?
> >> >
> >> >Steve Brown
> >> >
> >>
> >> There is a short IDE cable that attaches to the drive from the board
> >> beneath. The board terminates in a 68 pin UW-SCSI female connector. SCSI ID
> >> is configured by suitable jumpers on the card.
> >
> >Ummmmm. What am I missing? THis isn't possible. IDE? Are you sure? Count
> >the pins.
> >
>
> Acard's ARS2000FW IDE to SCSI bridge.
I stumbled on this in the middle. Sorry. Have you updated the drivers to version
3.6? What *exactly* is the problem?
--
==============================================================
Kyle H. Hansen
Apple Certified Technician
Apple Solution Expert
Macintosh Server Administrator
[EMAIL PROTECTED]
==============================================================
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
