I have a Fujitsu M2949ESP and a 50 pin adapter. On the right side of the adapter, there are eight jumpers with the following labels:
- LED - (no label) - DLY - MTR - ID3 - ID2 - ID1 - ID0 In order to set it as ID 3, I need to put a block onto both ID0 and ID1, right? How about termination and power indicator? Anybody know how to do it? What is the use of the rest of the jumpers? (I know the top one is for a PC style LED). On the left side, there are pins for the power I guess, but how about the audio, how to connect it? There are nothing left on the adapter except the SCSI pins. Where can I find the jumper blocks? Radio Shack or...? Thank you. --------------------------------------------------------------- --------------------------------------------------------------- Free eMail and Web Site for Macintosh Users http://www.applelinks.com/ ---------------------------------------------------- The Think Different Store http://store.applelinks.com/ --------------------------------------------------------------- --------------------------------------------------------------- -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
