mkbike wrote: >>no, it will fry the board > > Thanks for those who warned me on this. > I was told by a vendor that the 7200 will only work with DIMMS up to 64MB. > While that is what the manual says, I was wondering if anyone has > successfully used 128MB non-EDO DIMMS in a 7200. > > Thanks, > Mike > [EMAIL PROTECTED] > >
When my 7500 was a 7200/120 it ran fine with a 128MB FPM DIMM installed. It's best to use DIMMs with identical specs. Even up to the 9600 the technical guide states that 64MB are the maximum and mentions that 128MB DIMMs are "untested". Some sites still list the maximum RAM of various PCI Macs by only counting 64MB DIMM in each slot. -+-+-+- RPM -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
