At 8:12 PM -0800 1/22/2003, Robert P. McAllister wrote: >mkbike wrote: > >>>no, it will fry the board >> >> Thanks for those who warned me on this. >> I was told by a vendor that the 7200 will only work with DIMMS up to 64MB. >> While that is what the manual says, I was wondering if anyone has > > successfully used 128MB non-EDO DIMMS in a 7200.
I have a couple of 7200s each with a single 128M DIMM in it, no problems. > >When my 7500 was a 7200/120 it ran fine with a 128MB FPM DIMM installed. >It's best to use DIMMs with identical specs. There is no particular reason to use DIMMs with identical specs I know of. The 7200 doesn't interleave memory. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting [EMAIL PROTECTED] "I'm a designated driver on the Information Super Highway" -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
