I just installed 6 new 128mb sticks in my 9500 (interleaved). I was running with 340mb, now it's up to 1GB, after removing a couple of small 8MB pieces. Slots are filled with either 128's or 64's, but not all interleaved. Also running a Sonnet G3 400/512.
Since installing the new ram yesterday, I've had nothing but problems. Machine freezes quite often, and now I can only boot into OS 9, and it's saying my OS X partition is unrecognized and it needs to be initialized. Before I start ripping stuff apart and re-installing, I was just wondering if there's any tips for running 128mb pieces in a 9500? I've heard that with a Sonnet card, you might have to NOT interleave the memory. And some machines are flaky with the 128's installed. Thanks! -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
