Robert Easton <[EMAIL PROTECTED]> writes: > >I think he meant master/slave jumper configuration. One must be set as >master (the one on the last plug) and one must be set as slave (the one on >the middle plug)
Actually, it doesn't matter which device is set to master and which is set to slave--as long as you don't have two masters or two slaves. If you have a single device then it should be set to master and it should be on the end of the cable (mostly just to avoid having an 'antenna' hanging off the end of the channel). -Jeff [EMAIL PROTECTED] -- "You can't brew a premium lager with a kool-aid mentality." --Harold Green in _The_Red_Green_Show_ -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
