Hi All, Just picked up a 6115cd upgraded with a newer tech g3 card. But I can't seem to get any video, all I get is a black screen. It also has a separate video card on it, but it does not have a name on it. I have replaced the battery but to no avail (the battery was dead however and I did leave it sit for 10 minutes before reinstalling the battery). I have pulled the ram, reseated the nusbus card, unplugged the hard drive and cd and inserted a floppy. It will run with the floppy in it, but still no video. I can hear the chimes and I can hear the hard drive spin up, but still no video. I have tried both the on board video... with an adapter... and the added card. I have tried two different monitors..... now I am at a loss...... Anyone with any ideas before I take it back...... Thanks, pam
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
