Grzegorz Pawlik wrote: >I have a XLR8 Carrier card in my PM8500, with a G3 ZIF card. The person who >sold it to me said it is a G3 300MHz produced by Apple. I have set bus speed >to 46,4MHz and the processor speed to 370MHz. Is it safe? I mean, are there >any dangers that I should be aware of? Anything other than the processor >temperature (it never reaches more than 40C)? I remember reading somewhere >that running G3 at a higher speed might damage it. > >--
You could crank up the upgrade to 8x 50 mHz bus speed = 400 mHz. If it hangs dropped down 1 - 2 notches on the bus setting to 8x 48 MHz = 384 MHz, or the PLL multiplier to 7x 50 = 350 MHz. The G3 on my Powerbook 3500 runs hotter at 99 degrees. Charlie -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
