My Reply follows quote. On 31/03/2003 22:43 [EMAIL PROTECTED] said: >From: [EMAIL PROTECTED] (Kris Jones) > >>would a 6500 motherboard, say a 300Mhz one, fit in a 6360 case and >work as >>normal, or are there other issues (like PSU, PCI slot >placement etc...) > >I'm not sure about the 6360, but I believe it has the same wiring harness as >the 630 series... and I tried to put a 6400 together using a 630 harness, >and it didn't work. The power supply is controlled by a different method, I >believe. > >Logistically, if you can rectify the wiring mojo, I think all you have to do >is replace the two-slot pci L-adapter with a one-slot, and get the >appropriate back panel. ---------- The 6360 and 6400 use the same logic board and both are PCI Macs. I know of at least one person who is successfully using a 6500 logic board in a 6360 case.
Ken -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
