TattleTech is no longer going to be produced and the author has released the last versions as freeware. (An OS 6 and earlier version, a special version for Mac, Mac+ and Classic and an OS 7.0-9.x version.) http://www.tattletech.com for downloading.
Under the "Displays" heading in the pull down menu you will find each connected display. The 5th line under the Display #1 heading wil be the "Installed VRAM" , which shows actual bytes and either 2 or 4 MB in parentheses. (I have 2 monitors and an additional video card, so I show Display #1 and Display #2) David Allen > > >2. The 8600 will only run a single monitor if it has the minimum 2 Meg of > >VRAM. The default monitor will be the one connected to the monitor video > >connector and the other will remain dark. (Page 92 in the 8600 User's Manual.) > >To use 2 devices for video without adding a PCI slot video card requires the > >full 4 Meg of VRAM. > > > >David Allen > > > There are no problems with audio in or out, so point 2 sounds like a good > suspect. How can I tell how much VRAM is installed without opening the > case? System Profiler doesn't seem to have that info. > > thanks, jim -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
