>Motor start Enable ME >Delay motor Start DS I added a jumper here since it is the 2nd >drive, is that OK?
These are the two to play with. I can not remember the settings, but IIRC, you do NOT want to delay motor start, that is a setting used with servers to protect the power supply from too large of power demand upon startup. Try reversing the current settings (Jumper ME and do not jumper DS). Since there are only 4 combinations, and you have already tried 1, it should not be too hard to experiment with these to get your drive working. HTH Len -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
