Did you do a clean install or did you transfer everything from your other drive?
I had an Acard 66 in my 9500 with a 40 gig maxtor and it worked fine, and I could boot from either drive. I have since put that card in my blue and white and now use the 9500 to format drives. I even had an eide 52x cd rom connected to it, along with the 40 gig maxtor and had no problems. Try re-installing the system again, as I do not have a clue to what an error 10 is. Maybe there is a sight for troubleshooting this card? Steve Brown --- "A.Tuazon" <[EMAIL PROTECTED]> wrote: > Has anyone experienced this problem before? Does > anyone know what an error > 10 is? Thanks in advance. BTW I did upgrade the > firmware on the tempo card > (it's actually an ACARD 6260M). __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
