Peter, To set a switch "on" is it towards the card or away from the card?
Also, when I turn on the 9600, it powers on, without a chime, and then I do a software reset and it chimes and comes on. I added extra memory and a bigger drive yesterday, and found it was taking several software resets before the chime/startup. When I took the G3 Newertech card out and replaced it with a 180 (gawd help me if I don't abbreviate properly - so I'll just say 180 megahickey) from a 9500 and it started first time every time. This newertech card was one I spoke to you about a few weeks ago, and we established the cache wasn't working on it. But after a couple of boots with the 180, the 9600 began to quit on the Mac OS startup screen. Any ideas on what I might have done? Ratched the system folder or something more sinister? Tom -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
