> -----Original Message----- > From: PCI PowerMacs [mailto:[EMAIL PROTECTED] Behalf > Of [EMAIL PROTECTED] > Sent: Monday, September 08, 2003 3:47 PM > To: PCI PowerMacs > Subject: Re: 9600/200 card in a 7300/180 > > > > >From memory (I have not opened up my 7300 lately) you can only > have 1 or 3 > >SIMMs (it has 1Mb on board) > > That's a 7200. > > A 7300, as with all other on-board video systems of this generation, > requires either 2 or 4 SIMMs. > Told you I was not sure, however check the Vram is in the correct slots, 1&3 or 1,2,3,4 as it will not work in 1&2 I think I have got it right this time ;-) (GURU will give you the definitive answer, however I am in front of a PC at the moment, so I cannot check) Ben.
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
