>If you only have 2 MB of RAM, doesn't that mean that you don't have >the Postscript SIMM installed? I thought the Postscript SIMM, in >addition to adding Postscript took the printer up to 4 MB.
According to info, the printer should have had both the PS SIMM *and* the RAM SIMM, but both were missing. I got the PS SIMM off of eBay, but I didn't know that the RAM SIMM was also required. With just the PS SIMM installed, the printer has only that which is on the mobo, which is 2 MB. Worked as a PS printer with only 2 MB but at only 300 dpi (no surprise there). So, I bought one 8 MB RAM SIMM for a total of 10 MB, which should be more than enough for 600 dpi, which requires only 8 MB on the similar Apple LaserWriter Pro 630 (same Canon EX marking engine). -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
