From: [EMAIL PROTECTED] Date: Sat, 4 Oct 2003 21:31:21 EDT
If you only have 2 MB of RAM, doesn't that mean that you don't have the Postscript SIMM installed? I thought the Postscript SIMM, in addition to adding Postscript took the printer up to 4 MB.
According to info, the printer should have had both the PS SIMM *and* the RAM SIMM, but both were missing.
I got the PS SIMM off of eBay, but I didn't know that the RAM SIMM was also required.
With just the PS SIMM installed, the printer has only that which is on the mobo, which is 2 MB.
My (wetware) memory said that the postscript SIMM included 2 MB of RAM as well as the postscript ROM on the same SIMM, but as I wrote in my earlier message, it has been some years since I dealt with the LJ4M. So, perhaps the case was that they shipped the 4M with a Postscript SIMM and a separate 2 MB SIMM and that mutated in my memory. I'm reasonably certain that the LJ4M shipped with Postscript and 4 MB of RAM total, but not 100% certain.
Jeff Walther
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
