Still can't G3 on 9500

[mkauspe]

SO I left the battery out all night and most of the evening, still 
won't give video. I held the cuda switch in for a minute. Tried zapping 
the PRAM. I don't have anything on it but one stick of RAM - 64MB FPM 
DIMM, the Sonnet G3, a Voodoo 3 3000, power supply, and speaker. (So I 
can hear the dong) The whole board is even out of the chassis. I can 
put a MAXpwr 225MHz 604e in it and it pops right up. I know the G3 is 
good, it works in a 7500 and 8500. Sonnet website says that it is 
compatible. Any other suggestions? Thanks a lot everyone,

Mike (aka PC Tech)
Computer/Networking Support Technician
AAHS, CO, Academy School District 20
"Don't trust anyone below 10,000 feet" -Me Dad

--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169   |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>

PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:   <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:   <mailto:[EMAIL PROTECTED]>
For digest mode, email:  <mailto:[EMAIL PROTECTED]>
Subscription questions:  <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com