Hi, I am having trouble hooking up a Personal Laserwriter/300 to my 7500...
I have done this COUNTLESS times with other machines & printers -- as any good Mac Momma would(!) -- but this particular combo is giving me fits! The printer is not being seen at all by the computer, using the "Laserwriter 300/LS" option in the Chooser, w/ Appletalk off as required, on the free printer port. I KNOW BOTH the printer port and the serial cable are working, because I hooked up my 1400cs serially and connected it to the 7500 via Appletalk. Now, UNLESS it is possible for that connection to be made and STILL the cable cannot see the printer, I must assume the serial cable is okay. As for the printer, I tested it hours ago on another machine w/ another data cable & power cord; everything worked fine. I am at wit's end here; is there a way to reset and/or run a test printout on the Personal Laserwriter? Thanks, Kim B. Athens, GA -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
