In a message dated Nicole <[EMAIL PROTECTED]> writes: << I have a pdf with the fireball settings. I've put the jumpers in different locations for 1 and 2. I either get a flashing ?, a gray screen with nothing, or the original drive boots but not the second one.
. . . I removed the jumper and swapped it with the original drive on the SCSI cable - surprise!! the drive booted just fine. So, I guess that means it's probably the SCSI cable, huh? In theory, I just need to replace the cable? Or could it be something else?>> ----------- The flashing? and gray screen is also a classic sign of improper termination. Check your pdf for termination information. The drive at the end of the cable should be terminated; the other drive should not be terminated. --glen (digest mode) -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
