On Sun, 13 Jun 2004 08:56:35 -0600, anonymous wrote: >>A Matrox Millennium II video card works fine in a 9600/200 with the monitor >>plugged directly into the card. However, when switched through a KVM, the >>stand-by light on the monitor changes from orange to green on power up and >>there is a raster but no video from the card appears. >> >>What needs to be done to get the picture to appear when switched through the >>KVM? > Try re-booting
Thanks, but no-go - have re-booted ad-nausea and reset the PRAM 20 times, all to no avail. If the monitor is connected directly to the video card during boot-up, the display works fine, even after unplugging the monitor, reconnecting it to the KVM (probably an exaggeration to call this a KVM - it is labelled Data Transfer Switch) then connecting the 9600 to the KVM. Re-booting after this reverts to raster but no display. Anyone (TIA)? -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
