I asked on the SWAP List for a good PCI Mac and have been offered a bunch of variously configured 9600 CPUs, from 200, 233 and 300 MHz.
They have different PCI cards, installed RAM and HD configurations but the prices reflect this. They also have the two different motherboard types and speeds: 50 MHz on most and 46 MHz on the 233 MHz 9600. Are there unique problems associated with upgrading the earlier Tsunami or later Kansas boards , with the two different types of processor cards that are incompatible. I will probably be putting a processor upgrade card into whatever 9600 I get. Are there any problems I should know about with one type being more finicky or unstable than the other ? Is the extra-large power supply on the 300 MHz model a notable plus or not ? I weould appreciate any information from anyone who has bought any model and had trouble with it. M -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
