Linda,
I'm not sure why that computer is trying to gain access, but you can add
each of the computers IP address to allow it by clicking the security tab,
then 'advanced'.
Jeff
FAX 1-413-280-0677
Jeff Dougherty
Intrepid Video & Electronics
501 Luther Rd
Harrisburg, PA 17111
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Linda Johnson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 05, 2001 7:11 AM
Subject: PCWorks: zone alarm and LAN
> Hi gang.......I use Zone Alarm as my firewall and I have a cable
connection
> that
> is set up as a LAN and I also have a small peer to peer network of 3
> computers, connected thru a Linsys router
>
> I have a question about my security settings in ZA......If I set up my
local
> network settings as "Low", does this allow others on my cable LAN to see
my
> stuff??
>
> Also, why would ZA keep telling me that it has blocked access to the IP of
> one of my computers?.....it's weird cuz this computer shares NOTHING and
yet
> one of my others is trying to access it all the time.
>
> setup of what's happening
>
> computer 1.......has one drive and one printer shared
> computer 2.....has 2 partitions and one printer shared
> computer 3....has nothing shared
>
> ZA on computer 3 keeps telling me that it has blocked access from IP
> <computer 1>
>
> TIA
>
> Linda
> www.personal-computer-tutor.com
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
