Can anyone advise please.
Computer working OK on shut down.
On restart later in the day the message "Pri Master HDD Error - run set up"
came up.
The floppy drive is still there but the only other drive is
shown as Y - previously I also had C for hard and D for cd.
I shut the power off hoping this might cure it but on restart
a boot failure message came up instructing me to insert boot disk.
After doing this and it booted up to some drivers a message came up saying
drive is not recognised.
THanks
John
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
